User Manual of WIFI Network Video Recorder
93
8.1 Setting Motion Detection Alarm
Steps:
1. Enter Motion Detection interface of Camera Management.
Menu > Camera > Motion
2. Select a Camera to set up motion detection from the drop-down list.
3. Check Enable Motion Detection checkbox.
4. Use the mouse to draw detection area(s) in the right live view window.
5. Drag the scroll bar to set the Sensitivity.
By default, the motion detection is enabled and configured in full screen.
6. Click button to set alarm response actions.
Figure 8. 1 Motion Detection Setup Interface
7. Click Trigger Channel tab and select one or more channels which will start to record or become full-screen
monitoring when motion alarm is triggered, and click Apply to save the settings.
Figure 8. 2 Set Trigger Camera of Motion Detection
8. Configure Arming Schedule of the channel.
1) Select Arming Schedule tab.
To Next Page
Loading...
