User Manual of WIFI Network Video Recorder
152
12.2 Configuring Quota Mode
Purpose:
Each camera can be configured with allocated quota for the storage of recorded files.
Steps:
1. Enter the Storage Mode interface.
Menu > HDD > Advanced
Figure 12. 6 Storage Mode Settings Interface
2. Select a Camera to configure quota parameters.
3. Input the capacity in the text fields of Max. Record Capacity (GB).
4. Repeat the steps above to configure for other cameras.
Or copy the current camera settings to other cameras by clicking the Copy button to enter the Copy Camera
menu, as shown in Figure 12. 7.
Figure 12. 7 Copy Settings to Other Camera(s)
5. Click the OK button to save the settings and back to the Storage Mode interface.
6. Click the Apply button to apply the settings.
If the quota capacity is set to 0, then all cameras will use the total capacity of HDD for record.
To Next Page
Loading...
