User Manual of WIFI Network Video Recorder
130
11.2 Configuring Advanced Settings
11.2.1 Configuring Wireless Network
Configuring WAN Settings
Purpose:
The device provides you with wired and wireless network features, just as a wireless router. You can access to
internet via NVR instead of a router.
Before you start:
Establish the connection between the NVR and Internet via the WAN interface.
Steps:
1. Enter WAN configuration interface.
Menu > Configuration > WIFI
Figure 11. 2 WAN Configuration Interface
2. Select the Connection Mode as PPPoE.
3. Input Account and Password in the text field.
4. Click Apply to dial up.
Configuring WIFI Settings
Steps:
1. Enter WIFI configuration interface.
Menu > Configuration > WIFI
Figure 11. 3 WIFI Configuration Interface
2. Click the WIFI tab to enter WIFI configuration interface.
3. Input SSID in the text field.
To Next Page
Loading...
