User Manual of WIFI Network Video Recorder
47
Figure 4. 10 PTZ Panel - General
3. Click the Call Pattern button to call it.
4. Click the Stop Pattern button to stop calling it.
4.3.7 Customizing Linear Scan Limit
Purpose:
The Linear Scan can be enabled to trigger the scan in the horizontal direction in the predefined range.
This function is supported by some certain IP cameras.
Steps:
1. Enter the PTZ Control interface.
Menu > Camera > PTZ
Figure 4. 11 PTZ Settings
2. Use the directional buttons to wheel the camera to the location where you want to set the limit, and click the
To Next Page
Loading...
