User Manual of WIFI Network Video Recorder
156
12.5 Configuring HDD Error Alarms
Purpose:
You can configure the HDD error alarms when the HDD status is uninitialized or abnormal.
Steps:
1. Enter the Exception interface.
Menu > Configuration > Exceptions
2. Select the Exception Type as HDD Error.
3. Click the checkbox(s) linkage action to set the HDD error alarm type (s), as shown in Figure 12. 12.
The alarm type can be selected as Audible Warning, Notify Surveillance Center, Send Email and Trigger
Alarm Output. For details, please refer to section 8.5 Handling Exceptions Alarm.
Figure 12. 12 Configure HDD Error Alarm
4. Click the Apply button to save the settings
To Next Page
Loading...
