User Manual of WIFI Network Video Recorder
174
15.3 Configuring More Settings for NVR
Steps:
1. Enter the General Settings interface.
Menu > Configuration > General
2. Click the More Settings tab to enter the More Settings interface, as shown in Figure 15. 3.
Figure 15. 3 More Settings Interface
3. Configure the following settings:
• Device Name: Edit the name of NVR.
• Device No.: The No. is used for the remote and keyboard control. The Device No. can be set in the range
of 1~255, and the default No. is 255.
• Auto Logout: Specify timeout for menu inactivity. E.g., when it is set to 5 Minutes, then the system will
exit from the current operation menu to live view after 5 minutes of menu inactivity.
4. Click the Apply button to save the settings.
To Next Page
Loading...
