HIKVISION DS-7108NI - Setting Sensor Alarms

User Manual of WIFI Network Video Recorder
95
8.2 Setting Sensor Alarms
Purpose:
Set the handling action of an external sensor alarm.
Steps:
1. Enter Alarm Settings of System Configuration.
Menu > Configuration > Alarm
2. Select Alarm Input tab to enter Alarm Input Settings interface.
Figure 8. 4 Alarm Input Setup Interface
3. Select Alarm Input No. in the drop-down list.
4. Check the Enable checkbox.
5. Click the button after Settings to set up its alarm response actions.
6. Select Trigger Channel tab and select one or more channels which will start to record or become full-screen
monitoring when an external alarm is input, and click Apply to save the settings.
Figure 8. 5 Trigger Channel Settings
7. Select Arming Schedule tab to set the arming schedule of handling actions.
1) Choose one day of a week. Up to eight periods can be set within each day
2) Click Apply to save the settings.
Time periods cannot be repeated or overlapped.
3) Repeat the above steps to set up arming schedule of other days of a week. You can also use Copy
button to copy an arming schedule to other days.