User Manual of WIFI Network Video Recorder
96
Figure 8. 6 Set Arming Schedule of Alarm Input
8. Select Linkage Action tab to configure alarm response actions. For details, please refer to section 8.5
Handling Exceptions Alarm.
9. If necessary, select PTZ Linking tab to set PTZ linkage for the alarm input.
Before the setting, check whether the selected speed dome supports PTZ linkage or not.
Figure 8. 7 Set PTZ Linking of Alarm Input
10. Click OK to save the settings.
One alarm input can trigger presets, patrol or pattern of more than one channel. But presets, patrols and
patterns are exclusive.
11. If you want to set handling action of another alarm input, repeat the above steps.
Or click the Copy on the Alarm Input Setup interface and check the checkbox of alarm inputs to copy the
settings to them.
To Next Page
Loading...
