User Manual of WIFI Network Video Recorder
169
Refer to the user manual of the FTP server to set the FTP server on your PC and put the firmware file into the
directory as required.
Steps:
1. Enter the Upgrade interface.
Menu > Maintenance > Upgrade
2. Click the FTP tab to enter the local upgrade interface, as shown in Figure 14. 9.
Figure 14. 9 FTP Upgrade Interface
3. Input the FTP Server Address in the text field.
4. Click Upgrade to start upgrading.
5. After the upgrading is complete, reboot the NVR to activate the new firmware.
To Next Page
Loading...
