Network Video Recorder User Manual
80
Figure 7-10 Set Arming Schedule of Video Loss
2) Choose one day of a week and up to eight time periods can be set within each day.
Note
Time periods shall not be repeated or overlapped.
3) Click Apply to save the settings.
6. Select Linkage Action to set up alarm response action of video loss (please refer to Setting
Alarm Response Actions).
7. Click OK to complete the video loss settings of the channel.
7.4 Detect Video Tampering Alarm
Trigger alarm when the lens is covered and take alarm response action(s).
Steps
1. Enter Menu → Camera → Video Tampering.
To Next Page
Loading...
Need help?
General
