Network Video Recorder User Manual
81
Figure 7-11 Video Tampering Setting
2. Select a channel you want to detect.
3. Check Enable Video Tampering Detection.
4. Drag the sensitivity bar to set a proper sensitivity level. Use the mouse to draw an area you
want to detect video tampering.
5. Click button to set up handling action of video tampering.
6. Set arming schedule and alarm response actions of the channel.
1) Click Arming Schedule.
Figure 7-12 Set Arming Schedule of Video Tampering
2) Choose one day of a week and Max. eight time periods can be set within each day.
To Next Page
Loading...
Need help?
General
