HIKVISION DS-7100NI-K1/W/M Series - PTZ Control; Configure PTZ Settings

Network Video Recorder User Manual
28
of 16 channels in one screen.
3.5 PTZ Control
Enter a short description of your concept here (optional).
This is the start of your concept.
3.5.1 Configure PTZ Settings
Follow the procedure to set the parameters for PTZ. The configuring of the PTZ parameters should
be done before you control the PTZ camera.
Steps
1. Enter the PTZ Settings interface. Go to Menu → Camera → PTZ.
Figure 3-11 PTZ Settings
2. Click PTZ Parameters to set the PTZ parameters.