HIKVISION DS-7100NI-K1/W/M Series - Chapter 5 Playback; Play Back Record Files

Network Video Recorder User Manual
45
You can click to set the accurate time
of the schedule.
● To schedule an all-day recording, check the checkbox after All Day.
Figure 4-7 Edit Schedule
● To arrange other schedule, set Start/End time for each period.
Note
Up to 8 periods can be configured for each day. And the time periods can’t be
overlapped each other.
● Select the record type.
Note
○ To enable Motion, Alarm, M | A (motion or alarm), M & A (motion and alarm) and
VCA (Video Content Analysis) triggered recording and capture, you must configure the
motion detection settings, alarm input settings or VCA settings as well. For detailed
information, refer to Set Motion Detection Alarm and .
○ The VCA settings are only available to the smart IP cameras.Repeat the above edit
schedule steps to schedule recording or capture for other days in the week. If the
schedule can also be applied to other days, click Copy.