HIKVISION DS-7108NI-Q1/M

Set Password Reseng Email
When you forgot your login paern and password, the device will send an email contains
vericaon code to your email for password reseng.
Steps
1. Go to
Conguraon → System → User .
2. Click Password
Reseng Email.
3. Enter admin password for
authorizaon.
4. Enter an email address.
5. Click OK.
Reset Password
You can reset your password when you forgot your login paern and password.
Steps
1. Click Forgot Password at the password login interface.
2. Follow the wizard to reset password.
5.1.3
Excepon
You can receive excepon events hint in alarm center, and set excepon linkage acons.
Steps
1. Go to Conguraon → System → Excepon .
2.
Oponal: Congure event hint. When the set events occur, you will receive hints in alarm
center.
1) Enable Event Hint.
2) Click
at the upper-right corner of local menu to enter alarm center.
3) Select an event type.
4) Click Set to select events to hint.
3. Set
Excepon Type
4. Select Normal Linkage and Trigger Alarm Output type for
excepon linkage acons.
Network Video Recorder User Manual
18