HIKVISION DS-7108NI-Q1/M

2. Click Patrol.
3. Select a desired patrol.
4. Click Set.
5. Click
.
6.
Congure key point parameters, such as the key point No., duraon of staying for one key point
and speed of patrol. The key point is corresponding to the preset. The preset number
determines the order at which the PTZ will follow while cycling through the patrol.
Duraon
refers to the me span to stay at the corresponding key point. Speed denes the speed at which
the PTZ will move from one key point to the next.
Figure 2-4 Patrol Sengs
7. Click Apply.
What to do next
Select a patrol and click Call to call it. The PTZ camera will move according the predened patrol
path.
Figure 2-5 Call Patrol
2.2.5 Customize Paern
A paern records the movement path and dwell me in a certain posion. When you call a
paern, the PTZ camera will move according to the recorded path.
Steps
1. Preview a camera in live view and click on shortcut menu.
2. Click
Paern.
3. Select a paern.
4. Click Record.
5. Use direcon buons to wheel the camera to required locaons. Adjust zoom and focus as your
desire.
6. Click Stop Recording. The previous PTZ camera moving path is recorded as a
paern.
Network Video Recorder User Manual
9