HIKVISION DS-7108NI-Q1/M

Steps
1. Go to
Conguraon → Event → Normal Event → Video Tampering .
Figure 6-16 Video Tampering
2. Set Camera.
3. Turn on Enable.
4. Adjust Sensivity as your desire. The higher the value is, the more easily the video tampering
can be triggered.
5. Set the arming schedule. Refer to
Congure Arming Schedule for details.
6. Set the linkage acons. Refer to Congure Alarm Linkage Acon for details.
7. Click Apply.
Video Loss
Detect video loss of a camera and take alarm response acons.
Steps
1. Go to
Conguraon → Event → Normal Event → Video Loss .
2. Set Camera.
3. Turn on Enable.
4. Set the arming schedule. Refer to
Congure Arming Schedule for details.
5. Set the linkage acons. Refer to Congure Alarm Linkage Acon for details.
6. Click Apply.
Alarm Input
Set linkage
acons for an external sensor alarm.
Steps
1. Go to
Conguraon → Event → Normal Event → Alarm Input .
Network Video Recorder User Manual
55