EasyManua.ls Logo

HIKVISION DS-PK-L Series - Components and Beeps; Indicator; Key; Beeps

HIKVISION DS-PK-L Series
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1
Components and Beeps
Indicator
Solid Green: No Conguraon
Flashing Green: In the Conguraon Status
Solid Orange: System Fault
O: No Fault
Solid Green: All Enabled Channels Connected Normally
O: Part of or All Enabled Channels Connected Abnormally
Solid Blue: Armed
O: Disarmed
Flashing Red: Alarm Occurred/Tamper Alarm
O: No Alarm
Key
Beeps
One Beep Pressing keys/command med out or too long/Fault Prompt
Two Beeps Valid command/Report uploaded
Five Beeps Invalid command/Failed to upload the report in 60 s
Slowly Connuous Beeps In the Entry/Exit delay status, the Delay zone armed, or 2 min before auto arming/disarming starng
Rapidly Connuous Beeps In the Entry/Exit delay status, the Delay zone triggered, or 1 min before auto arming/disarming starng
Rapid Beeps Zone alarm/keypad not registered
Three Long Beeps and Two Short Beeps Keypad tampered
Three Beeps Keypad registered
4

Related product manuals