User Manual of Digital Video Recorder
39
3) Click Add to add the camera.
OPTION 2:
Steps:
1. Enter the Camera Management interface.
Menu> Camera> Camera
Figure 2. 14 Main Menu
2. Repeat the step 3 and 4 of OPTION 1 to add the camera.
Figure 2. 15 IP Camera Management Interface
Table 2. 2 Explanation of the icons
Edit basic parameters of the camera
Add the detected IP camera.
The camera is connected; you can
click the icon to get the live view of
the camera.
The camera is disconnected; you can
click the icon to get the exception
information of camera.
Advanced settings of the camera，
3. (For the encoders with multiple channels only) check the checkbox of Channel No. in the pop-up window,
as shown in the following figure, and click OK to finish adding.
To Next Page
Loading...
Need help?
General