Need help?Do you have a question about the HIKVISION DS-9000 and is the answer not in the manual?
General| Video Compression | H.264 |
|---|---|
| Video Output | HDMI |
| Audio Compression | G.711, G.726, AAC |
| Two-Way Audio Input | Yes |
| Hard Disk | 8 SATA interfaces |
| Capacity | Up to 10TB per HDD |
| Network Interface | 10/100/1000Mbps |
| USB Interface | 2x USB 2.0, 1x USB 3.0 |
| Alarm In/Out | 16/ |
| Power Supply | 100-240V AC, 50/60Hz |
| Working Temperature | -10 °C to 55 °C (14 °F to 131 °F) |
| Operating Humidity | 10% to 90% |
Provides a general introduction and overview of the DS-9000/DS-9100 series DVR.
Details the main features and capabilities of the DVR, including compression, monitoring, and HDD management.
Illustrates the typical setup and connectivity of the DVR within a surveillance system.
Explains the various methods for navigating and controlling the DVR, including front panel, remote, mouse, and keyboard.
Details the physical ports and connectors located on the rear of the DVR unit.
Guides users on the proper methods for starting up and safely shutting down the DVR unit.
Describes how to reboot the DVR or lock it to return to the Live Preview mode, requiring authentication.
Outlines the steps for initial configuration of the DVR using the guided Setup Wizard.
Explains how to view live camera feeds, switch cameras, and navigate the Live Preview interface.
Covers using the mouse for advanced Live Preview functions and configuring display settings.
Details how to use the digital zoom feature and connect/use an auxiliary monitor for live viewing.
Guides on setting up general recording parameters, stream types, resolution, and creating recording schedules.
Explains how to protect recorded files by locking them or setting HDDs to read-only, and managing HDD redundancy.
Introduces the playback interface and essential controls for viewing recorded video footage.
Details methods for searching recordings via General Search, Event Search, and System Log.
Covers frame-by-frame playback, digital zoom during playback, and playback from system logs.
Explains how to export recorded files to external devices like USB drives or DVDs.
Describes operations for managing connected backup devices within the export menu.
Guides on setting up motion detection areas, sensitivity, and configuring external sensor alarms.
Covers the setup for detecting video loss and video tampering events.
Explains how to configure system exceptions like HDD errors and network issues, and their trigger options.
Details how to set up IP address, subnet mask, gateway, and DHCP for network connectivity.
Covers configuring PPPoE, DDNS, NTP server, remote alarm host, multicast, MTU, ports, and email settings.
Explains how to navigate PTZ menus, configure PTZ camera settings, and understand basic PTZ controls.
Guides on setting up and using custom presets, patrols, and patterns for PTZ cameras.
Details the process of adding and configuring IP cameras to work with the DVR.
Covers configuring On-Screen Display (OSD) settings and setting up privacy masks for camera views.
Guides on initializing, managing, and setting up network HDDs for the DVR.
Explains how to group HDDs, set their status (read-only, redundancy), and configure HDD alarms.
Details how to check HDD status, view SMART information, and configure HDD alarms.
Covers general and advanced system settings, including language, time, and display options.
Explains how to configure the DVR for RS-232 serial communication with external devices.
Guides on managing user accounts, adding new users, setting permissions, and modifying existing accounts.
Provides definitions for technical terms and acronyms used in the manual.
Offers answers to common questions regarding DVR operation and troubleshooting.
To Next Page