44
Figure 9. Playback Interface
• Using the Front Panel/Remote:
1. Press the PLAY button. This will take you into the Playback interface.
2. Enter the channel you would like to watch recordings for on the front panel or remote (i.e. press
‘11’ for channel 11).
3. Recordings will begin for the selected channel.
Note: DS-91xxHDI-S series supports all channels playback. DS-90xxHFI-S supports 4 channels playback, disabling
channels and reallocating resources may increase the number of channels available for multi-playback. However, this is
for advanced users and should not be attempted by end-users. Please contact tech support for further information.
Disabled channels cannot be played back, previewed or recorded.
Playing Back from System Log
You may also playback recordings from the System Log.
To playback video from the System Log:
1. Enter the Log Search menu by clicking Menu > Maintenance > Log Search (shown in Figure 10).
Figure 10. Log Search Menu
2. Set Major Type setting to Information.
To Next Page
Loading...
