Need help?Do you have a question about the HIKVISION DS-9204HWI-ST and is the answer not in the manual?
General| Video Input | 4 channels |
|---|---|
| Power Supply | 12V DC |
| Audio Output | 1 channel |
| Operating Humidity | 10% to 90% |
| Video Output | 1 HDMI, 1 VGA |
| Compression | H.264 |
| Network Interface | 1 RJ45 10M/100Mbps |
| Audio Compression | G.711 |
| Frame Rate | 25 fps |
| Hard Disk Interface | SATA |
| USB Interface | 2 USB 2.0 |
| Power Consumption | ≤ 10W |
| Operating Temperature | -10°C to +55°C (14°F to 131°F) |
| Audio Input | 4-ch |
| Weight | ≤1.5kg (3.31lb) |
Overview of the device's front panel components and their functions.
Guide to operating the device using the included infrared remote control.
Instructions on using a USB mouse for device control and navigation.
Detailed description of the device's rear panel connectors and ports.
Procedure for properly powering the device on and off to ensure longevity.
Step-by-step guide to the initial setup wizard for essential device configuration.
Instructions for connecting and adding IP cameras to the system.
Details on how to configure the basic settings of connected IP cameras.
Explains how to navigate and interact within the live view interface.
Guide to customizing live view parameters like output, display mode, and dwell time.
Setup and configuration of PTZ parameters, including RS-485 settings.
How to customize and manage PTZ presets, patrols, and patterns for automated camera movements.
Access and utilize the PTZ control panel for real-time camera manipulation and settings.
Define parameters affecting image quality, stream type, resolution, and bitrate.
Set the schedule for automatic recording and capture for cameras.
Setup motion detection parameters to trigger recording or capture events.
Configure recording and capture actions triggered by alarm inputs.
Instructions for manual recording and continuous capture settings.
Methods to protect recorded files from being overwritten or deleted.
Guide on how to search and play back recorded video files.
Steps to play back recorded video files by specifying a date and time.
How to play back recordings triggered by specific events like motion or alarms.
Utilize smart search to efficiently find and play back relevant video segments.
Search and view captured still images stored on the device.
Procedure for backing up recorded video files to external storage devices.
Method for quickly exporting record files to a backup device.
Steps to back up record files by performing a normal video search.
Configuration for hot spare backup system for enhanced data reliability.
Configure motion detection parameters, including areas, sensitivity, and linkage actions.
Set detection rules for VCA events like line crossing and intrusion.
Define actions to be taken when an alarm or exception occurs.
Configure essential network parameters like IP address, subnet mask, and gateway.
Access and configure advanced network features such as PPPoE, DDNS, and NTP.
Setup NAT settings for remote access using UPnP or manual port mapping.
Configure HTTPS for secure, encrypted communication with the device.
Guide to creating RAID arrays and virtual disks for storage management.
Quickly create RAID arrays and virtual disks using the one-touch configuration.
Instructions for upgrading the device firmware via local backup or FTP.
Procedure for initializing newly installed Hard Disk Drives before use.
Organize and manage multiple HDDs into groups for recording and capture.
Steps to clone data from the device HDD to an eSATA disk.
Setup alarms for HDD status like uninitialized or abnormal conditions.
Customize On-Screen Display settings for cameras, including date, time, and name.
Set up privacy masks to cover specific areas in the video feed.
Adjust image parameters like brightness, contrast, and saturation for cameras.
Search, view, and export device operation, alarm, and system logs.
Backup and restore device configuration files to/from a backup device.
Procedure to reset the device to its factory default settings.
Configure RS-232 serial port parameters for PC connection or transparent channel.
Adjust general device settings like language, video standards, and resolutions.
Create, manage, and assign permissions for user accounts.
Steps for logging out, shutting down, or rebooting the device.
Definitions of technical terms and acronyms used in the manual.
Solutions to common problems encountered during device operation.
List of IP cameras compatible with the device.
To Next Page