User Manual of Digital Video Recorder
163
9.2.9 Configuring HTTPS Settings
Purpose:
HTTPS (Hyper Text Transfer Protocol Secure) ensures the data transferred is encrypted using Secure Socket Layer
(SSL) or Transport Layer Security (TLS). HTTPS provides authentication of the web site and associated web
server that one is communicating with and creates a secure channel over an insecure network.
HTTPS URLs begin with https:// and use port 443 by default. You can modify the port No. as desired.
Example:
If you set the port No. as 445 and the IP address of the device is 192.0.0.64, you can access the device by inputting
https://192.0.0.64:445 in the web browser.
Steps:
1. Access the device via the web browser and enter the HTTPS settings interface.
Configuration > Remote Configuration > Network Settings > HTTPS
2. Create the self-signed certificate or authorized certificate.
Figure 9. 26 HTTPS Settings
OPTION 1: Create the self-signed certificate
1) Click the Create button and a dialog box pops up as follows:
Figure 9. 27 Create Self-signed Certificate
2) Enter the country, host name/IP, validity and other information.
3) Click OK to save the settings.
OPTION 2: Create the authorized certificate
1) Click the Create button to create the certificate request.
To Next Page
Loading...
Need help?
General