User Manual of Digital Video Recorder
135
8.3 Detecting Video Loss
Purpose:
Detect video loss of a channel and take alarm linkage action(s).
Steps:
1. Enter Video Loss interface and select a channel you want to detect.
Menu> Camera> Video Loss
Figure 8. 9 Video Loss Settings Interface
2. Set handling method of video loss.
Check checkbox to enable video loss alarm, and click to set handling method of video loss.
3. Set arming schedule of the channel.
Select Arming Schedule tab to set the channel’s arming schedule.
Choose one day of a week and up to eight time periods can be set within each day. Set up arming schedule of
other days of a week. You can also use Copy to copy an arming schedule to other days. Click Apply to save
the settings.
Time periods cannot be repeated or overlapped.
Figure 8. 10 Set Arming Schedule of Video Loss
4. Select Linkage Action tab to set up alarm linkage action of video loss (please refer to Chapter 8.7).
Click Apply to save the settings and click OK to complete the video loss settings of the channel.