User Manual of Digital Video Recorder
183
10.5 Upgrading Firmware
Purpose:
You can view the information of the firmware and upgrade the firmware by local backup device or remote FTP
server.
Steps:
1. Enter the Firmware interface to view the information of the firmware, including the version, maximum
physical disk quantity, maximum array quantity, auto-rebuild status, etc.
Menu > HDD > RAID > Firmware
Figure 10. 25 Firmware Interface
2. You can click Upgrade to upgrade the firmware. Local upgrade and FTP upgrade are available. Since the
upgrading process of the firmware is the same as that of the device firmware, you can refer to Chapter 13.4
for detailed information.
Please contact the dealer immediately if the device cannot work properly after upgrading.
To Next Page
Loading...
