User Manual of Digital Video Recorder
164
2) Download the certificate request and submit it to the trusted certificate authority for signature.
3) After receiving the signed valid certificate, import the certificate to the device.
3. The certificate information will be displayed after you successfully created and installed the certificate.
Figure 9. 28 Installed Certificate Property
4. Check the checkbox to enable the HTTPS function.
The HTTPS Port should be set to the range of 1-65535.
9.2.10 Virtual Host Settings
Purpose:
You can directly get access to the IP camera management interface from the HDVR management interface.
The Virtual host function is only supported by the HDVR series.
You can only configure the virtual host settings through the web browser.
Steps:
1. Enter the Advanced settings interface.
Configuration > Remote Configuration > Network Settings > Advanced
Figure 9. 29 Advanced Settings Interface
2. Check the checkbox of the Enable Virtual Host.
3. Click the Save button to save the setting.
4. Enter the IP camera management interface of HDVR. The Connect column appears on the right-most side of
the camera list.
Configuration > Remote Configuration > Camera Management > IP Camera
To Next Page
Loading...
Need help?
General