User Manual of Digital Video Recorder
52
3.4 Channel-zero Encoding
Purpose:
Sometimes you need to get a remote view of many channels in real time from web browser or CMS (Client
Management System) software, in order to decrease the bandwidth requirement without affecting the image quality,
channel-zero encoding is provided as an option for you.
Steps:
1. Enter the Live View Settings interface.
Menu> Configuration> Live View
2. Click the Channel-Zero Encoding tab.
Figure 3. 11 Live View- Channel-Zero Encoding
3. Check checkbox to enable channel-zero encoding.
4. Configure the Frame Rate, Max. Bitrate Mode and Max. Bitrate.
After you set the channel-zero encoding, you can get a view in the remote client or web browser of all the channels
in one screen.