User Manual of Digital Video Recorder
191
11.4 Managing HDD Group
11.4.1 Setting HDD Groups
Purpose:
Multiple HDDs can be managed in groups. Video from specified channels can be recorded onto a particular HDD
group through HDD settings.
Steps:
1. Enter the Storage Mode interface.
Menu > HDD > Advanced > Storage Mode
2. Set the Mode to Group, as shown below.
Reboot the device to activate the new settings.
Figure 11. 10 Storage Mode Interface
IP Camera is supported by HDVR series only.
3. Click Apply and reboot the device to activate the new settings.
4. After reboot of device, enter the HDD Information interface.
Menu > HDD > General
5. Select a HDD from the list and click to enter the Local HDD Settings interface.
Figure 11. 11 Local HDD Settings Interface
To Next Page
Loading...
Need help?
General