User Manual of Digital Video Recorder
221
14.5 Managing User Accounts
Purpose:
There is a default account in the device: Administrator. The Administrator user name is admin and the password is
12345. The Administrator has the permission to add and delete user and configure user parameters.
Steps:
1. Enter the User Management interface.
Menu > Configuration > User
Figure 14. 6 User Management Interface
2. Click Add to enter the Add User interface.
Figure 14. 7 Add User Interface
3. Enter the information for new user, including User Name, Password, Level and User’s MAC Address.
Level: Set the user level to Operator or Guest. Different user levels have different operating permission.
Operator: The Operator user level has permission of Local Log Search in Local Configuration,
Remote Log Search and Two-way Audio in Remote Configuration and all operating permission
in Camera Configuration.
Guest: The Guest user has permission of Local Log Search in Local Configuration, Remote Log
Search in Remote Configuration and only has the local/remote playback in the Camera
Configuration.
User’s MAC Address: The MAC address of the remote PC which logs onto the device. If it is configured
and enabled, it only allows the remote user with this MAC address to access the device.
4. Click OK to save the settings. The added user will be displayed in a list on the User Management interface.
Figure 14. 8 User List
To Next Page
Loading...
Need help?
General