User Manual of Digital Video Recorder
95
Figure 6. 5 Toolbar of Playback by Time
The indicates the start time and end time of the record files.
represents normal recording (manual or schedule); represents event recording (motion, alarm, motion
| alarm, motion & alarm, VCA).
Playback progress bar: use the mouse to click any point of the progress bar to locate special frames, and a
thumbnail of the specified frame will be displayed.
Table 6. 1 Detailed Explanation of Playback-by-time Interface
6.1.2 Playing Back by Event
Before you start:
Configure the event (motion, alarm input and VCA) triggered record schedule. For details, see Chapter
5.3~Chapter 5.5.
Purpose:
Play back the recordings triggered by different types of events (e.g. alarm input and motion detection).
Steps:
1. Enter the playback interface.
Menu>Playback
2. Select Event from the drop-down list in the upper-left corner of the page to enter the Event Playback
interface.
3. Select Alarm Input, Motion or VCA as the event type, and specify the start time and end time for search.
4. Click Search, and the record files matching the search conditions will be displayed on a list.