User Manual of Digital Video Recorder
168
Steps:
1. Enter the Network Traffic interface.
Menu > Maintenance > Net Detect
2. Click the Network Detection tab to enter the Network Detection interface.
3. Select the backup device from the drop-down list of Device Name.
Click Refresh if the connected local backup device cannot be displayed. When it fails to detect the backup
device, please check whether it is compatible with the device. You can format the backup device if the format
is incorrect.
Figure 9. 35 Export Network Packet
4. Click Export to start exporting.
5. After the exporting is complete, click OK to finish the packet export.
Up to 1M data can be exported each time.
9.4.3 Checking Network Status
Purpose:
You can also check the network status and quick set the network parameters in this interface.
Dual NIC is not supported by DS-7200HWI-SV series.
We use the interface of DS-9100HFI-ST series (unless otherwise stated) as example to describe the following
settings.
Steps:
1. Enter the Network Traffic interface.
Menu > Maintenance > Net Detect
2. Click the Network Detection tab to enter the Network Detection interface.
3. Click Status to get the network status.
To Next Page
Loading...
Need help?
General