User Manual of Digital Video Recorder
200
11.9 Checking S.M.A.R.T. Information
Purpose:
The S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) is a monitoring system for HDD to detect
and report on various indicators of reliability in the hopes of anticipating failures.
This chapter is not available for DS-9100/9000HFI-RT series.
Steps:
1. Enter the S.M.A.R.T. Settings interface.
Menu > Maintenance > HDD Detect >S.M.A.R.T. Settings
2. Select a HDD to view its S.M.A.R.T. information list.
If you want to use the HDD even when the S.M.A.R.T. checking is failed, you can check the checkbox
before the Continue to use this disk when self-evaluation is failed item.
3. Three self-tests of S.M.A.R.T are provided, including Short Test, Expanded Test and Conveyance Test. You
can select a self-test type and click to start self-test.
Figure 11. 21 S.M.A.R.T. Settings Interface
To Next Page
Loading...
Need help?
General