User Manual of Digital Video Recorder
188
11.2 Managing Network HDD
Purpose:
You can add the allocated NAS or disk of IP SAN to device, and use it as network HDD.
Steps:
1. Enter the HDD Information interface.
Menu > HDD > General
2. Click Add to enter the Add NetHDD interface.
3. Add the allocated NetHDD.
4. Select the type to NAS or IP SAN.
5. Configure the NAS or IP SAN settings.
Add NAS disk:
1) Enter the NetHDD IP address in the text field.
2) Click Search to search the available NAS disks.
3) Select the NAS disk from the list shown below.
Or you can just manually enter the directory in the text field of NetHDD Directory.
4) Click OK to add the configured NAS disk.
Up to 8 NAS disks can be added.
Figure 11. 5 Add NAS Disk
Add IP SAN:
1) Enter the NetHDD IP address in the text field.
2) Click Search to search the available IP SAN disks.
3) Select the IP SAN disk from the list shown below.
4) Click OK to add the selected IP SAN disk.
Up to 1 IP SAN disk can be added.
To Next Page
Loading...
Need help?
General