User Manual of Digital Video Recorder
63
Park (Quick Patrol): The PTZ camera starts the quick patrol (from preset 1 to preset 32 in order)
automatically after the park time. The undefined preset will be skipped.
Park (Patrol 1): The PTZ camera moves according to the path of predefined patrol 1 after the park time.
Park (Preset 1): The PTZ camera moves to the location of predefined preset 1 after the park time.
5. Click the button again to inactivate the corresponding park action.
Figure 4. 9 Control Panel-Call Linear Scan
The park time can only be set through the local menu of PTZ camera and the default value is 5s.
4.3 PTZ Control Panel
To enter the PTZ control Panel, there are 2 ways supported:
Option1:
In the PTZ settings interface, click the PTZ button on the lower-right corner.
Option2:
In the Live View mode, you can press the PTZ Control button on the front panel or on the remote control, or click
the PTZ Control icon in the quick setting toolbar, or click PTZ Control on the right-click menu to enter the
PTZ control panel.
Click the Configuration button on the panel, and you can enter the PTZ Settings interface.
In PTZ control mode, the PTZ panel will be displayed when a mouse is connected with the device. If no mouse is
connected, the icon appears in the lower-left corner of the window, indicating that this camera is in PTZ
control mode.
To Next Page
Loading...
