Need help?Do you have a question about the HIKVISION HiLook NVR 104MH-D/4P and is the answer not in the manual?
General| Model | HiLook NVR 104MH-D/4P |
|---|---|
| Channel Support | 4 Channels |
| Video Input | 4-ch IP video input |
| Incoming Bandwidth | 40 Mbps |
| Decoding Format | H.265/H.264 |
| Synchronous Playback | 4-ch |
| SATA Interface | 1 SATA Interface |
| HDD Capacity | Up to 6TB |
| USB Interface | 2 USB 2.0 |
| PoE Interface | 4 PoE Ports |
| PoE Standard | IEEE 802.3af/at |
| Consumption (without HDD) | ≤ 10W |
| Working Humidity | 10% to 90% |
| Recording Resolution | 4 MP/3 MP/1080p/UXGA/720p/VGA/4CIF/DCIF/2CIF/CIF/QCIF |
| HDMI Output | 1 HDMI Output |
| VGA Output | 1 VGA Output |
| Capability | NVR |
| Network Interface | 1 RJ-45 10M/100M Ethernet |
| PoE Power Budget | ≤65W |
| Working Temperature | -10°C to +55°C (14°F to 131°F) |
Information about the manual's content and usage guidelines.
Lists trademarks and their owners.
Legal disclaimer regarding product use and liability.
Compliance with FCC rules for digital devices.
Conditions for FCC compliance.
CE marking and compliance with EU directives.
Compliance with Industry Canada standards.
Steps to activate the NVR by setting an admin password.
Procedures for logging into the NVR.
Overview of the live view interface and its controls.
Controls for Pan, Tilt, and Zoom cameras.
Overview of the playback interface and timeline.
How to play back standard recorded videos.
How to play back videos related to specific events.
How to clip and export video segments.
How to search for recorded video, picture, or event files.
Basic system settings.
Settings for network connectivity.
Managing connected cameras.
Settings for recording video.
Advanced system settings.
Advanced network configuration.
Advanced camera management.
Configuring various event detection types.
Managing recording settings.
Restoring device settings to factory defaults.
Searching and exporting system logs.
Managing system services.
Procedures for upgrading device firmware.
Configuring event hints in the alarm center.
Viewing detected alarms in the alarm center.
Accessing the NVR via a web browser.
Logging into the NVR via the web interface.
Viewing live streams through the web interface.
Accessing playback features via the web interface.
Configuring NVR settings via the web interface.
Accessing and searching logs via the web interface.
Definitions of technical terms used in the manual.
To Next Page