Need help?Do you have a question about the HIKVISION HWN-2108MH-8P and is the answer not in the manual?
General| Model | HWN-2108MH-8P |
|---|---|
| Channel Capacity | 8 channels |
| Power over Ethernet (PoE) | Yes |
| HDMI Output | 1 |
| VGA Output | 1 |
| USB Ports | 2 × USB 2.0 |
| Operating System | Embedded Linux |
| Incoming Bandwidth | 80 Mbps |
| Outgoing Bandwidth | 80 Mbps |
| Decoding Format | H.265+/H.265/H.264+/H.264 |
| Two-Way Audio | Yes |
| SATA | 1 SATA interface |
| PoE Standard | IEEE 802.3af |
| Consumption (without HDD) | ≤ 10W |
| Working Humidity | 10% to 90% |
| Type | Network Video Recorder |
| Video Input | 8-ch IP video input |
| Max Resolution | 8MP |
| Storage Capacity | Up to 8TB |
| HDD Bays | 1 |
| Network Interface | 1 x 10/100/1000 Mbps |
| VGA Output Resolution | 1920 × 1080 |
| Decoding Capability | 8 × 1080p |
| Audio Output | 1 channel |
| PoE Interface | 8 × RJ45 10/100 Mbps |
| PoE Power Budget | ≤65W |
| Working Temperature | -10 °C to 55 °C (14 °F to 131 °F) |
| Weight (without HDD) | 1.2 kg |
Details FCC compliance requirements and conditions for device operation.
Describes features for viewing video locally, including resolution and display options.
Covers features related to hard disk drive management, capacity, and status.
Guides through the initial setup, power on/off, and device activation process.
Explains the setup wizard for initial NVR configuration.
Details the process of adding and connecting IP cameras to the NVR system.
Details various operations and functions available within the live view interface.
Guides on setting up parameters for controlling PTZ cameras.
Explains how to configure presets, patrols, and patterns for PTZ camera movement.
Covers setting recording parameters like stream type, resolution, and encoding.
Explains how to set up recording schedules for cameras based on time and events.
Details how to configure motion detection for triggering recordings and actions.
Guides on setting up recording triggered by alarm inputs and events.
Describes setting up recording for events detected by Video Content Analysis (VCA).
Covers various methods for playing back recorded video files, including instant and normal search.
Covers methods for backing up recorded video files to external devices.
Guides on configuring motion detection alarms and their response actions.
Explains how to configure alarms for video loss detection.
Explains how to configure actions that occur when an alarm is triggered.
Details the configuration and rules for face detection VCA alarms.
Covers basic network configuration like IP address and working mode.
Guides on initializing new hard disk drives before use.
Details the process of upgrading the NVR firmware via local device or FTP.
Guides on restoring NVR settings to factory defaults.
Offers solutions for common issues encountered with the NVR.
To Next Page