Network Video Recorder User Manual
198
Configuring Video Parameters
Purpose:
You can customize the image parameters including the brightness, contrast, saturation, image
rotate and mirror for the live view and recording effect.
Enter the Image Settings interface.
Menu > Camera >Image
Image Settings Interface
Select the camera to set image parameters.
Adjust the slider or click on the up/down arrow to set the value of the brightness, contrast or
saturation.
Select the Enable Rotate function to Clockwise 270 degrees or OFF. When OFF is selected,
the image is restored to original.
Select the Mirror Mode to Left-Right, Up-Down, Center or OFF. When OFF is selected, the
image is restored to original.
The Rotate and Mirror functions must be supported by the connected IP camera.
The image parameters adjustment can affect both the live view and the recording quality.
Click the Apply button to save the settings.
To Next Page
Loading...
Need help?
General
