Network Video Recorder User Manual
194
Configuring HDD Error Alarms
Purpose:
You can configure the HDD error alarms when the HDD status is Uninitialized or Abnormal.
Enter the Exception interface.
Menu > Configuration > Exceptions
Select the Exception Type to HDD Error from the dropdown list.
Click the checkbox(s) below to select the HDD error alarm type (s), as shown in Figure 12-29.
The alarm type can be selected to: Audible Warning, Notify Surveillance Center, Send Email and
Trigger Alarm Output. Please refer to Chapter Setting Alarm Response Actions.
Configure HDD Error Alarm
When the Trigger Alarm Output is selected, you can also select the alarm output to be
triggered from the list below.
Click the Apply button to save the settings
To Next Page
Loading...
Need help?
General
