Need help?Do you have a question about the HIKVISION HWN-4108MH-8P and is the answer not in the manual?
General| Model | HWN-4108MH-8P |
|---|---|
| Channel Input | 8 |
| Max Resolution | 8MP |
| Video Compression | H.265+/H.265/H.264+/H.264 |
| Power over Ethernet (PoE) | Yes |
| PoE Standard | IEEE 802.3af/at |
| HDMI Output | 1 |
| VGA Output | 1 |
| Two-Way Audio | Yes |
| USB Interface | 2 × USB 2.0 |
| Incoming Bandwidth | 80Mbps |
| Outgoing Bandwidth | 80Mbps |
| Consumption (without HDD) | ≤ 10W |
| Working Humidity | 10% to 90% |
| Type | Network Video Recorder |
| Storage Capacity | Up to 10TB |
| HDD Bays | 1 |
| Network Interface | 1 x 10/100/1000Mbps |
| HDMI Output Resolution | 4K (3840 × 2160) |
| VGA Output Resolution | 1920 × 1080 |
| Audio Input | 1 |
| Audio Output | 1 |
| Working Temperature | -10°C to +55°C (14°F to 131°F) |
Initial activation process for the video recorder, including password setup and camera activation.
Methods for logging into the device, including unlock patterns and passwords.
Configuration and operation of Pan, Tilt, and Zoom (PTZ) cameras.
Basic system settings including date, time, resolution, user management, and exceptions.
Configuring network parameters like IP address, DHCP, Hik-Connect, and email notifications.
Adding, configuring, and managing network cameras, including OSD and event settings.
Advanced system settings for language, display, and user management in expert mode.
Detailed network configuration including TCP/IP, DDNS, NAT, ports, and log server settings.
Advanced camera settings, display options, privacy masks, and channel configurations.
Configuring various event types like motion detection, video tampering, and perimeter protection.
Procedures for upgrading device firmware, including local and online methods.
To Next Page