HIKVISION HWN-4108MH-8P - Camera Upgrade; Device Status; Upgrade; Local Upgrade

3.
Go to Device Maintenance → Schedule Reboot .
4.
Turn on Enable.
5.
Set the reboot schedule.
6.
Click Apply.
7.5.2 Camera Upgrade
Upgrade the camera(s) in the added device list.
Steps
1.
ClickMaintenance（ ） → More → Deice Maintenance → Camera Upgrade.
2.
Click Check for Updates.
3.
Upgrade camera.
-
Select the channel to upgrade, and click the Upgrade on the right.
-
Click Quick Upgrade to upgrade all channels that have updates.
7.5.3 Device Status
You can mute the selected channel(s).
Steps
1.
Click at the upper-right corner.
2.
Click More.
3.
Go to Device Maintenance → Device Status .
4.
In the Mute and Not Disturb column, check the corresponding channel(s).
Result
The selected channel(s) will be muted.
7.6 Upgrade
Warning
Do not shutdown or turn o the power during upgrade.
7.6.1 Local Upgrade
Before You Start
Store the upgrade
rmware to a backup device, and connect it to your device.
Steps
1.
Go to Maintenance .
Network Video Recorder User Manual
81