HIKVISION HWN-4108MH-8P - Advanced Settings

Figure 6-25 Quota
Note
When the quota capacity is set to 0, all cameras will use the total capacity of HDD for videos and
pictures.
5.
Click Apply.
6.
Reboot the video recorder to acvate the new sengs.
6.6.5 Advanced
Sengs
Steps
1.
Go to Conguraon → Record → Advanced Sengs .
2.
Congure the parameters as your desire.
Overwrite
●
Disable: When the HDD is full, video recorder will stop wring.
●
Enable: When hard drive is full, video record will connue to write new les by deleng the
oldest les.
Enable HDD Sleeping
HDDs which are free of working for a long me will turn into sleep status.
Network Video Recorder User Manual
78