HIKVISION HWN-4108MH-8P - OSD Settings

5.
Click Upgrade to start upgrading. The camera will restarted automacally aer upgrade
completed.
Congure Advanced Camera Parameters
You can congure advanced camera parameters like camera IP address, camera password, etc.
Before You Start
●
Ensure your network camera is on the same network segment with your video recorder.
●
Ensure the network
connecon is valid and correct.
Steps
1.
Go to Conguraon → Camera → IP Camera .
2.
Click .
3.
Set camera parameters like IP address, camera password, etc.
4.
Click Apply.
5.3.2 OSD
Sengs
Congure OSD (On-Screen Display) sengs for the camera, including date format, camera name,
etc.
Steps
1.
Go to
Conguraon → Camera → OSD .
2.
Select a camera.
Figure 5-9 OSD
3.
Drag the text frames on the preview window to adjust the OSD posion.
Network Video Recorder User Manual
30