HIKVISION HWN-4108MH-8P - Event

4.
Click Apply.
5.3.3 Event
Moon Detecon
Moon detecon enables the video recorder to detect the moving objects in the monitored area
and trigger alarms.
Steps
1.
Go to Conguraon → Camera → Moon Detecon .
2.
Select a camera.
3.
Check Enable.
4.
Set the
moon detecon area.
-
Click Draw Area or Clear to draw or clear areas. The
rst area is set as full screen by default.
-
Click Full Screen to set the moon detecon area as full screen. You can drag on the preview
window to draw
moon detecon areas.
Note
The operaon may dier according to dierent models.
5.
Adjust Sensivity. Sensivity allows you to calibrate how readily movement triggers the alarm. A
higher value results in the more readily to triggers moon detecon.
6.
Set analysis mode as AI or PIR.
AI
The
moon detecon event will be analyzed by your device.
PIR
The moon detecon event will be analyzed by certain analog PIR cameras.
7.
Oponal: Set Target Detecon as Human or Vehicle to discard alarms which are not triggered
by human or vehicle.
Note
This funcon is only available for certain models.
8.
Set the arming schedule. Refer to Congure Arming Schedule for details.
9.
Set the linkage acons. Refer to Congure Alarm Linkage Acon for details.
10.
Click Apply.
Congure
Arming Schedule
Steps
1.
Select Arming Schedule.
Network Video Recorder User Manual
31