HIKVISION HWN-4108MH-8P - Configure Arming Schedule

Steps
1.
Go to Conguraon → Event → Other Events .
2.
Select a thermal camera detecon event.
3.
Set Camera.
4.
Set the arming schedule. Refer to Congure Arming Schedule for details.
5.
Set the linkage
acons. Refer to Congure Alarm Linkage Acon for details.
6.
Click Apply.
6.5.5 Congure Arming Schedule
Steps
1.
Click Arming Schedule.
2.
Choose one day of a week and set the
me segment. Up to eight me periods can be set within
each day.
Note
Time periods shall not be repeated or overlapped.
Figure 6-21 Set Arming Schedule
3.
Click Apply.
Network Video Recorder User Manual
69