Need help?Do you have a question about the HIKVISION HiLook NVR-216MH-C/16P and is the answer not in the manual?
General| Brand | HIKVISION |
|---|---|
| Model | HiLook NVR-216MH-C/16P |
| Category | Network Hardware |
| Language | English |
Provides information about the manual's content and subject to change.
Lists trademarks and logos belonging to Hikvision and third parties.
Outlines terms of use, liability limitations, and user responsibilities for the product.
Details FCC compliance requirements and measures to correct interference.
Confirms compliance with European standards and WEEE directive for product disposal.
Guides on setting an admin password for initial device activation.
Procedures for logging into the device using pattern or password.
Explains the graphical user interface elements for live view and their functions.
Operations for controlling PTZ (Pan-Tilt-Zoom) cameras.
Overview of the playback interface, including timeline and control buttons.
Steps to play back recorded videos from selected cameras and dates.
How to play back videos associated with specific events like motion or intrusion detection.
Instructions on how to clip and export video segments to a backup device.
Configuration of system settings like date, time, resolution, and user management.
Setting up network parameters for device connectivity and remote access.
Adding, configuring, and managing network cameras connected to the NVR.
Configuration of recording schedules, parameters, and storage devices.
Advanced system settings including basic configuration, DST, and more settings.
Detailed network configuration options: TCP/IP, DDNS, NAT, NTP, and ports.
Comprehensive camera management: adding, editing, upgrading, and display settings.
Configuration of various events like motion detection, perimeter protection, and exceptions.
Setting up recording schedules for continuous or event-triggered recording.
Setting parameters for main and sub-stream recording, including pre/post-record.
Initializing HDDs and adding network disks for video storage.
Configuring HDD groups and individual HDD quotas for managing storage.
Configuring advanced recording settings like overwrite mode and VCA data saving.
Restoring device settings to factory defaults (simple, factory, or inactive).
Viewing and exporting system logs for operations, alarms, and information.
Accessing and configuring system services.
Procedures for upgrading device firmware via local USB or online methods.
Selecting events to be displayed as hints in the alarm center.
Accessing and viewing alarm details within the alarm center interface.
Overview of accessing the video recorder via web browser.
Steps for logging into the device using a web browser, including plug-in installation.
Displaying live camera feeds after logging in via the web interface.
Accessing the playback interface through the web browser.
Accessing the main configuration interface via the web browser.
Searching and viewing system logs through the web interface.
Definitions of technical terms and acronyms used in the manual.
To Next Page