HIKVISION HWN-4108MH-8P User Manual

3.
Select the Alarm Content.
4.
Set the arming schedule. Refer to Congure Arming Schedule for details.
5.
Set the linkage acons. Refer to Congure Alarm Linkage Acon for details.
6.
Click Apply。
5.5 Recording Management
5.5.1 Storage Device
Inialize HDD
A newly installed hard disk drive (HDD) must be inialized before it can be used to save videos and
informaon.
Before You Start
Install at least an HDD to your video recorder. For detailed steps, refer to Quick Start Guide.
Steps
1.
Go to Conguraon → Record → Storage .
2.
Select an HDD.
3.
Click Init.
Repair Database
Repair an HDD that with error in database. Please operate it with the help of professional
technical support.
Secure Erase
Secure erase will delete videos in the selected disk(s).
Add Network Disk
You can add the allocated NAS or IP SAN disk to the video recorder, and use it as a network HDD.
Steps
1.
Go to
Conguraon → Record → Storage .
2.
Click Add.
3.
Select NetHDD.
4.
Set Type as NAS or IPSAN.
5.
Enter NetHDD IP address.
6.
Click Search to search the available disks.
Network Video Recorder User Manual
35

HIKVISION HWN-4108MH-8P Specifications

General

Brand	HIKVISION
Model	HWN-4108MH-8P
Category	Network Hardware
Language	English