Network Video Recorder User Manual
145
Face Detection
Select the VCA detection type to Face Detection.
Check the Enable checkbox to enable this function.
Click to enter the face detection settings interface. Configure the trigger channel,
arming schedule and linkage action for the face detection alarm. Please refer to step3~step5
of Chapter 8.1 Setting Motion Detection Alarm for detailed instructions.
Click the Rule Settings button to set the face detection rules. You can click-and-drag the
slider to set the detection sensitivity.
Sensitivity: Range [1-5]. The higher the value is, the more easily the face can be detected.
Set Face Detection Sensitivity
Click Apply to activate the settings.
To Next Page
Loading...
Need help?
General
