www.hi-watch.eu
How to Add IP Camera to Non-PoE NVR
Steps:
1. Connect the devices.
2. Activate the devices and enable DHCP.
3. Go to the NVR’s website and add IPC.
Preparation
1 windows system PC,
At least 1 IP Camera,
1 Network Video Recorder,
At least 3 network cable,
1 POE Switch /non-POE Switch & compatible
power adapter for IP Camera.
Key Step 1 Connect the devices.
Steps:
1. You should connect the devices as below. And power up all the devices.
Key Step 2 Activate the devices and enable DHCP.
Steps:
1. Open SADP tool. Select an inactive device. Set the password and confirm it. Click active.
To Next Page
