iDS-2CD7xxG0-xxxxx Network Bullet Camera User Manual
UM iDS-2CD7xxG0-xxxxx 021021NA 43
1. Go to Configuration → Event → Basic Event → Exception.
2. Select Exception Type.
• HDD Full: The HDD storage is full.
• HDD Error: Error occurred in HDD.
• Network Disconnected: The device is offline.
• IP Address Conflicted: The current device’s IP address is same as that of another device in the
network.
• Illegal Login: Incorrect user name or password entered.
3. Refer to Linkage Method Settings for setting linkage method.
4. Click Save.
Set Alarm Input
Alarm signal from an external device triggers corresponding actions of the current device.
Before You Start
Make sure the external alarm device is connected. See Quick Start Guide
for cable connections.
Steps
1. Go to Configuration → Event → Basic Event → Alarm Input.
2. Check Enable Alarm Input Handing.
3. Select Alarm Input NO. and Alarm Type from the drop-down list. Edit the Alarm Name.
4. Refer to Set Arming Schedule for setting scheduled time. Refer to Linkage Method Settings for setting
linkage method.
5. Click Copy to... to copy the settings to other alarm input channels.
6. Click Save.
Set Video Quality Diagnosis
If the device video quality is abnormal and the alarm linkage is set, the alarm will trigger automatically.
To Next Page
Loading...
Need help?
General
