HIKVISION iDS-TCM403-A - Page 36

Figure 5-1 Set Image Parameters
2.
Set the camera parameters.
Note
The supported parameters vary with dierent models. The actual device prevails.
General Parameter
Enable Dual-Shuer
Set the stream type aer enabling it.
Saturaon
It refers to the colorfulness of the image color.
Sharpness
It refers to the edge contrast of the image.
White Balance
It is the white rendion funcon of the device used to adjust the color temperature
according to the environment.
Iris Mode
Select the iris mode as manual or auto.
Brightness Enhancement at Night
The scene brightness will be enhanced at night
automacally.
Light Compensaon on License Plate
Check it. The plate brightness compensaon can be realized, and various light supplement
condions can be adapted via seng license plate expectant brightness and supplement
Network Trac Camera Operaon Manual
24