HIKVISION iDS-TCM403-A - Install Authorized Certificate; Set SSH; Set RTSP Authentication

9.4.2 Install Authorized Cercate
If the demand for external access security is high, you can create and install authorized cercate
via HTTPS protocol to ensure the data transmission security.
Steps
1.
Go to Conguraon → Network → Network Parameters → HTTPS .
2.
Select Create cercate request rst and connue the installaon.
3.
Click Create.
4.
Follow the prompt to enter Country/Region, Domain/IP, Validity, and other parameters.
5.
Click Download to download the
cercate request and submit it to the trusted authority for
signature.
6.
Import
cercate to the device.
-
Select Signed
cercate is available, start the installaon directly. Click Browse and Install to
import the
cercate to the device.
-
Select Create the
cercate request rst and connue the installaon. Click Browse and
Install to import the
cercate to the device.
7.
Click Save.
9.5 Set SSH
To raise network security, disable SSH service. The conguraon is only used to debug the device
for the professionals.
Steps
1.
Go to
Conguraon → System → Security → Security Service → Soware .
2.
Uncheck SSH Service.
3.
Click Save.
9.6 Set RTSP
Authencaon
You can improve network access security by seng RTSP authencaon.
Steps
1.
Go to
Conguraon → System → Security → Security Sengs .
2.
Select RTSP Authencaon.
digest
The device only supports digest
authencaon.
digest/basic
The device supports digest or basic authencaon.
3.
Click Save.
Network Trac Camera Operaon Manual
45